The liquid material flows through the heat mixing pipe and enters the distribution device (overflow trough) at the front of the equipment, and continuously overflows from the overflow trough. The material is uniformly cooled by the cooling water between the upper and lower layers of steel belt, and the excellent heat transfer characteristics of the steel belt are used to solidify the liquid material into a solid material sheet during the movement process. The solidified product is scraped off the steel belt by a blanking scraper, then crushed by a crusher, and directly collected into the packaging process after being collected. The film-forming machine will adopt PLC centralized control, with multiple protection functions such as speed, liquid level, motor thermal protection, upstream and downstream chains, and a high degree of automation. Dangerous and vulnerable areas are equipped with safety protection devices, equipped with electrical safety interlock switches or emergency stop devices, with good safety performance. In the tableting machine, the cooling water is not in direct contact with the material, and the product will neither be contaminated nor change its composition. The cooling water can be recycled or directly discharged because it is not polluted, which will not cause pollution to the environment.

Specifications and models (can be specially designed according to site conditions)